Cooling water treatment
|Cooling water is essential where water is technically used. In air condition, for cooling engines, cooling processes or heat exchangers. The cooling water is conditioned at the cooling tower or chiller, pumped through a cooling water loop to the consumers. Usually this consumers are some kind of heat exchangers. To make this parts of a cooling water system work perfect togehter, a good cooling water treatment is required.|
WHAT IS A GOOD COOLING WATER TREATMENT?When physical conditions, like temperature or pressure in a liquid change, also the contained chemical substances change their behavior. For a good cooling water treatment it is essential to know, how water and its foreign substances behave under different conditions.
If the water evaporates, the foreign substances like calcium cant evaporate and remain in the water. Over time the cooling water holds more solids, which finally will settle and form limescale. These deposits can block pipes and machines and therefore might produce immense costs for cleaning. This has to be avoided and cooling water treatment of the complete cooling water system is required.
In the last years the cooling water treratment using Pursanova DiskTM in water systems, has become one of our core expertise and competence.
Where Pursanova water treatment can helpOPEN COOLING WATER SYSTEM
The cooling water is exposed to the atmosphere, because the system is open to the environment. Open system have one or a row of cooling towers. Here the evaporation is used for cooling of the water.
Cooling systems where sea water, river water or bore well water is used one time flow through, is a open cooling system.
CLOSED COOLING WATER SYSTEM
The water circles in the loop for a long time without being exchanged. As the cycle isn't open, the water itself doesn't have contact with the ambient air. The cooling of water is done by chillers or other kind of cooling units.
In the cooling tower the problems can be seen. And also this is the point where the classical chemical treatment take place. This Pursanova can support, making the used chemicals more efficient or in best case even replace.
In nearly all cooling water systems our customers face the same major problems. Corrosion, fouling, scaling and deposits, as well algae and the resulting biofouling, all these cause high maintenance costs, and might cause emergency shut downs.
Traditional for each problem one special chemical is needed. We came across cooling systems where a cocktail of six different chemicals where added. The chemicals has to be continous purchased, the equipment serviced, which all adding to the cost.
Pursanova is able to adresss all kinds of fouling (from corrosion to bio mass) in one Pursanova DiskTM. Over time deposits are flushed out. No further or far less cleaning effort is needed. Only monitoring the effect. This means we offer a long lasting solution for a good cooling water treatment.
How we can help.In big cooling loops, sometimes we treat loops with a few kilometer of pipes, providing cooling water to hundreds of heat exchangers, we install Merus Rings at strategic locations. The rings are installed after discussion with the customer. Sometimes for critical heat exchager we install direct in front. Or at less important coolers, we install one ring for several of these.
|To ensure the best results we also offer service agreements. They include the proper installation by one of our engineers and ongoing monitoring of the performance. The monitoring is done in cooperation with the customer. Often, existing tools and methods can be used |
Before installing we will analyse your system carefully, talk about blow down cycles and your processes to give our recommendation for the water treatment. We are interested in the cooling performance needed for your production. By having this close relation and understanding of your needs, we will be able to react fast, if circumstances change.
The goal is to find the perfect amount of Pursanova DiskTM installed in the ideal places in your system to gain long term success without further effort. By optimizing blow down and stabilizing the performance of the cooling, down-times can be reduced significantly. This saves costs for cooling water treatment in many ways.